Using this step-by-step guide, you can create or edit an existing settings to work with Captive WiFi.
Ruijie External Captive Portal Setup Guide
Before You Start
Make sure you have the following ready:
- Access to the Ruijie Cloud or Controller Web UI
- Your Ruijie AP(s) powered on and online
- External portal URL: https://getonline.captivewifi.io/guest/
Configuration Steps (Ruijie Cloud or Controller)
- Login to Ruijie Cloud or Controller UI
- Log in to the Ruijie Cloud portal or local controller.
- Navigate to the Device Config section and select Wi-Fi under Wireless.
- Create or Edit SSID
- Go to Wireless Settings > Wi-Fi.
- Create a new SSID or edit an existing one.
- Set SSID Name (e.g., GuestWiFi).
- Set Security Mode to Open (no password).
- Enable Captive Portal
- Go to the Auth & Account section.
- Select Captive Portal under Authentication.
- Set a Policy Name (any name you choose).
- Set Policy Mode to External.
- Set Authentication Device to Ruijie Enterprise AP.
- Select the Guest SSID you configured.
- In the Portal Server URL, enter:
https://getonline.captivewifi.io/guest/ - In the Portal IP, enter:
138.68.152.191 - Click Ok
- Add Allowed Domains (Walled Garden)
- Navigate to Auth & Account > Allowlist.
- Add the following domains and IP address:
- getonline.captivewifi.io
- captivewifi.fra1.digitaloceanspaces.com
- Save and Apply Configuration
- Save the SSID and portal configuration.
- Test the Captive Portal
- Connect a client device to the SSID.
- Verify that the external captive portal page loads successfully.
Support: For any issues, contact Ruijie support or your Captive WiFi platform.